Hot Runner / manifold
6.1 × 6.1 mm manifold heaters
Square-section tubular heaters for machined grooves in polymer-distribution manifolds.
Hot runner / manifold
6.1 × 6.1 mm square tubular heaters for manifolds
Square-section 6.1 × 6.1 mm tubular heaters for machined channels in plastic-distribution manifolds used in hot runner injection molds.
The table shows standard lengths and powers. Final selection should also verify supply voltage, effective groove length, bending radii, heat distribution, terminals and mounting conditions.
| Length (mm) | Power (W) |
|---|---|
| 350 | 550 |
| 400 | 650 |
| 450 | 750 |
| 500 | 800 |
| 550 | 900 |
| 600 | 1000 |
| 650 | 1100 |
| 700 | 1200 |
| 750 | 1300 |
| 800 | 1350 |
| 850 | 1450 |
| 900 | 1550 |
| 950 | 1650 |
| 1000 | 1750 |
| 1050 | 1850 |
| 1100 | 1950 |
| 1150 | 2050 |
| 1200 | 2100 |
| 1250 | 2200 |
| 1300 | 2300 |
| 1350 | 2400 |
| 1400 | 2500 |
| 1450 | 2600 |
| 1500 | 2700 |
| 1550 | 2800 |
6.1 × 6.1 mm manifold heaters for Hot Runner systems
Standard lengths and wattages for 6.1 × 6.1 mm square tubular heaters used in hot runner manifolds.
Request a quote